Eltham Machinery

Ingersoll Rand VL 140 drifters, one complete and bench checked, second one has no rotation motor. Sell separately or as a pair, 6,000 for the complete one or, 9,000 for the pair.

FG Wilson, mod. P110E, powered by 4cyl. Perkins turbo-charged motor, ex major hire company, 10,560 hrs., has been fully load tested, no known faults. Any inspection welcomed.

Atlas Copco BBD91W Panther , used, bench checked and field tested, four available. Atlas Copco model BBD46 Puma , two in stock. RH 658 and RH571 new or used, several in stock with steels if required. Also, Sig PLB 24 3 and PLB 29 1 Please call Tom.

Atlas Copco hydraulic drill rig, model 712H, powered by 4cyl Deutz air-cooled motor, choice of 1238 or 1032 drifters. This machine has not been used for fifteen years, will probably need some TLC on hoses, gauges etc, mechanically all seems to be ok. Please call Tom.

Gopher drills, model LDL350.3,nine in total, large number of used but serviceable steels, 100 unused tungsten tip bits, will sell individually or make an offer for the lot. Please call Tom.

Sullivan Palatek 375 CFM Compressor, powered by JD 4045 motor. Mounted on fast-tow trailer. This machine has done only 3,100 hours From service history Serviced and ready to go. Please call Tom.

Putzmiester Grout Screed pump, powered by Kubota 3cyl Diesel motor, fully functional. Please call Tom.

Deutz V10 air cooled motor F10l413F , taken from Atlas compressor canopy got destroyed , has done only 3,600 hours, ideal for water pump etc, runs clean, oil free air end also available.

F G Wilson 7.5 KVA generator, powered by Perkins 3 cylinder diesel motor, 7.5 KVA alternator, unity power factor, 7,407 hours worked, has been load tested for prolonged period and no faults presented.

Ingersoll Rand air end, removed from P1050 roll over had done 3000 hrs. This air end is also used in the XP900 and HP750 machines. Several other air ends in stock.

Sullair Air End, size 20, was coupled to GM 6V71 motor, on an 800 CFM compressor, has done 4,200 hours only.. Please call Tom.

Used ASEA three phase motor, 415 volt,2,960 RPM., removed from Atlas Copco compressor. Insulation tests ok, bearings sound good. Please call Tom.